When you need to know how to hook up a generator to your home, you will first have to determine what size of generator you will need. The area’s size will dictate what you will be using it in and whether there will be any electrical power lines you will need to run through. Once you know the generator’s size that you will be needing, you will also need to figure out how to connect it to your electrical system. There are two ways that you can go about this. The more traditional way to do this involves an extension cord being run from the power company to your home or garage and then into the area where you want to use the generator.
You can either run the cord through the attic or basement. Quite so, this will require that some modifications be made to your home to accommodate the generator. It is a good idea to talk to the person who hooked up your current electrical system to determine how they made the necessary changes. They may be able to recommend some things that will help you. Remember that if you are running electricity through your house, you will need to have all of the appropriate electrical equipment installed in your home and a licensed electrician.
Another method of hooking up a generator to your house is to use what is known as a transfer switch. There are four types of transfer switches that you can use. If you have separate circuits running from the generator to different locations in your home, you can use a particular connection for each site.
Some homes will use a one-way connection where the generator acts like a simple switch. Just so, this will allow the circuit only to run one way. This is useful if you intend to connect your generator directly to your home’s electrical system. If there is no existing connection, you can use a two-way connection. With this type, you can move the generator to wherever it needs to be and then connect it to the circuit with the transfer switch. Some varieties will also have isolation switches that will isolate a particular circuit from the rest.
There are also options where two conductors are used in the connection. A common type of two-conductor connection is used in how to hook up a generator to your house. These are usually short and are intended only to support one alternating current. If you use a three-conductor set-up, it will allow for the transfer of three currents, and this will be helpful if you need more than one power source.
The next thing you will need to know about how to hook up a generator to your house is the transfer switch and the isolation switch. The transfer switch is used to limit the power that the generator is allowed to produce at any given time. It is usually found on the wall behind the device. An isolation switch will be placed on the output side. Most isolation switches are placed on the input side so that you can use different power sources.
Once you have these parts in place, you will need to figure out how to hook up a generator to your house. If you are using the two-conductor system, attach the transfer switch on the wall next to the generator. If you are using three-conductor systems, connect an isolation switch on the input side next to the three-way connection. Now all you have to do is turn the generator on and see how it works!
Hopefully, this short article has given you some useful tips on hooking up a generator for your home. If you plan to have a generator at home, you should get one that can be hooked up by yourself. However, if you already have a generator but need to have it hooked up, call your local electrician. You will now know how to do so without needing any help. Just remember not to overload the generator, and you should be set! If all of this has sounded out of your skillset, then why not consider hiring a generator installation contractor? Electricity isn’t worth messing around with!