What is a Level 2 Asp Electrician?
This is a contractor that has the qualifications to install, disconnect, and reconnect electrical components in homes and businesses. They can work in overhead or underground environments to get the job done. They have a range of certifications, skills, and expertise that is way above that of a level 1 electrician.
They have qualifications in Australian Qualification Framework, overhead distribution, cable joint distribution, and the certification III electrotechnology electrician. They have completed class 2B disconnect and reconnect at connection points, class 2C overhead service connections, 2D installing metering equipment. They have registration with the Accredited Service Provider Scheme and have been authorised by the appropriate electrical distributors.
Basically, they have done all the training that they need to do. They have all the level 2 certified training that they need. They can do all the work that you will need them to do.
This article will share with you the day-to-day life of a level 2 ASP electrician. It will let you know the things that they do. You can also do research to find more information.
A Normal Day
A normal day for an electrician is from about 7:00am to about 3:30pm. Since the day doesn’t always have the same tasks, your hours may be different than that. You might not get started until after 9:00am and may not finish until way after 3:30pm. You will also get two breaks and lunch during the day.
Some jobs take longer than one day, while others can be completed in one day. Sometimes you will be required to work late to finish a job. If your company has emergency service, you may even have to work overnight and weekends.
Working late is not often a part of your job, and usually you will have regular working hours. This is a good career for a family person. You would be home for most of the evenings with your family.
Tasks And Challenges That Level 2 ASP Electricians Face On A Daily Basis
There are several tasks that electricians do for the homeowner. These can be ordinary things that you might need, or they might be things that happen only once in a lifetime: https://www.bls.gov/ooh/construction-and-extraction/electricians.htm. An electrician needs to know how to do all these things.
Some things that are necessary are diagnosing wiring problems, testing electrical equipment, inspecting equipment for hazards and defects, repairing wiring, and connecting wiring to components, circuit breakers, and transformers. They also need to know how to read plans and blueprints for bigger jobs.
Reading plans and blueprints are usually the job of the foreman or lead, but it may be your job. You need to learn how to do this so that you will always be ready to work. You don’t want to rely on others to get you started on your job.
Electrician Troubleshooting
While working on home electricity, sometimes an electrician must play detective. Sometimes those electrical issues aren’t as easy to find. You want to make sure that the home wiring is safe to keep the homeowner safe.
You may need to find out why the electricity is not working. This could be because of a bad wire somewhere or because something came loose. You need to find the problem because if not found it could cause a fire.
You don’t want to rush an electrical job because then you could be unsafe. You need to follow safety protocols while working with electricity. It can be dangerous to work with if you don’t follow protocols.
Work Conditions for Electricians
Most electrician jobs are inside for both residential and commercial. See more about your work conditions here. There are times that you must work outdoors, but the bulk of your work is inside. You should be prepared for all working conditions, just in case.
You are mostly working with your hands, and because of the fine wiring and tool work, you won’t wear gloves. You might get dirty if there is any demolition of any kind. Most of the time, you won’t need to worry about getting dirty because all the equipment that you use is clean.
Working On Power Network Connections
There are many large jobs that you could be working on including schools, hospitals, commercial buildings, or airports. You could be on the same project for weeks if not months. The electrical work usually starts at the beginning of the project.
Your work usually begins at 7:00am when you meet to pick up your tools. You might be working on the same project as the day before, or you might be beginning something new. Either way, you should know what you will be working on each day.
The foreman and leads for the day will read the blueprints and plans to see what needs to be done. There will probably be a safety review each day to make sure that you are using your tools and doing your job correctly. This is to protect you and those that are around you.
Sometime during the day, you will probably be working on power network connections. This can be setting up businesses for computer connections and wi-fi connections. This will be just one part of your job, but it can keep you busy.
This is just a typical day in the life of an electrician, but it could be different wherever you are. There could be tasks that you are expected to do in one area that you wouldn’t be expected to do in another area. This could be a dangerous job, but one that is very rewarding.
Conclusion
An electrician has a dangerous job, but it could be the perfect job for you. There is a lot to do each day, but you will usually have regular working hours of about 7:00am to 3:30pm – unless you work emergency hours. This could be the perfect job for you.
There is a lot that you need to know about electrical work. There are many classes that you need to take and certificates that you need to earn. These are things that must be done before you can become an electrician.