Now more than ever, small and established businesses alike are taking advantage of what 3D printing technology offers. Thanks to this technology, you can boost efficiency and increase the quality of your products. Better, it allows for timely development of prototypes while reducing overhead costs by significant margins.
But as is the case with any other new technology, it also comes with its downsides. While this tech can do so many amazing things, there are times when it may fail to meet business expectations. To help you reap maximum rewards, read on to learn more about 3D printing problems and how to deal with them hassle-free.
First Layer is Problematic
When checking out the first layer of your print, do you find it messy? If so, there is a good chance that the print is no longer sticking. Sometimes you will notice unwanted lines that tamper with the final product. That makes you start the process all over again, hoping things will turn out as you expect.
Well, taking this approach is never going to change the situation. Remember, this problem may signify that the print bed is a little too high. To solve this issue, you can try leveling the print platform. Alternatively, lower the print bed temperature and see how things transpire.
Over Extrusion of the Filament
A PLA filament or any other type, for that matter, doesn’t come at a throw-away price. That is why over extrusion of the filament can leave you stressed. After all, it only ends up ruining the overall quality of your final product. If your printer is over extruding, it is in your best interest that you fix it within the shortest time possible.
To pull this off successfully, you can lower the extrusion multiplier. Once you decrease the flow setting, you can stop the printer from extruding too much filament. If the problem persists, then you should consider reducing the print temperature as it can also work wonders.
Quality Issues
Many businesses find this to be one of the most common problems they have to deal with after purchasing a 3Dprinter. Most people complain of low-resolution output or fragile parts. Fortunately, there are numerous ways to fix these 3D printing problems without the hassle.
The easiest way to go about this is to ensure the bed is leveled and set the nozzle height perfectly. You can also experiment with building plates to see which one creates the best surface finish to compliment the object you want. There is nothing wrong with trying different solutions since you never know what will work to your advantage.
In Conclusion
Problems are always going to occur when leveraging 3D printing technology. However, what matters the most is how you choose to deal with those issues. No wonder you should never rush over the solution as long as you know the root cause of the problem. The earlier you identify a 3D printing problem, the easier it is to fix it.